Quick User Guide; Controls And Programs; Program Selection; Technical Data - Hoover Dynamic Next WDMT413AI2 Manual

5. QUICK USER GUIDE

This washing machine automatically adapts
the level of the water to the type and
quantity of washing. This system gives a
decrease in energy consumption and a
sensible reduction in washing times.

Program selection

l
Turn on the washing machine and select
the required program.
l
Adjust the washing
necessary and press the required "option"
buttons.
DRYING
If you would like the drying cycle to
begin automatically after washing,
select the programme required using
the DRYING SELECTION button.
Or you can finish the wash and then
select the drying programme and
load size.
l
Press the START/PAUSE button to start
washing.
l
The message "end" will appear on the
display or the corresponding led will turn
on at the end of the program.
Wait until the porthole locked light
turns off: about 2 minutes after the
program ends.
l
Turn off the washing machine.
For any type of wash, see the program
table and follow the operating sequence
as indicated.

Technical data

Water pressure: min 0,05 Mpa / max 0,8 Mpa
Spin r.p.m.: See rating plate.
Power input / Power current fuse amp /
Supply voltage: See rating plate.
6. CONTROLS AND
temperature if
A Touch Control (with ON/OFF
B START/PAUSE button
C SPIN SPEED button
D TEMPERATURE SELECTION
E DELAY START button
F WASH TIME button
G PREWASH button
H HYGIENE PLUS button
I
L DRYING SELECTION button
M FAVOURITES button
N NIGHT & DAY button
O Digital display
P DOOR LOCKED indicator light
Q DRYING PROGRAMME
E+N KEY LOCK
12
PROGRAMS
Q
A
P O
D
C
G H I
button)
button
EXTRA RINSE button
SELECTION button
F
L M N E
B