HOW TO ADJUST A SETTING
1. Press the Shuttle Knob to make the OSD window appear. See figure 5.
2. Rotate the Shuttle Knob to select the desired function. See figure 5.
3. Press the Shuttle Knob again to select the function that you want to adjust.
4. Rotate the Shuttle Knob to change the settings of the current function.
5. When the OSD window is active, it shows the input signal timing. The "H"
stands for the horizontal frequency and "V" for the vertical frequency.
6. To exit and save, select the exit functions, or leave the monitor alone for
10 seconds. If you want to adjust any other function, repeat steps 2-4.
ADJUSTING THE PICTURE
The description for function control LEDS
Contrast
1.
Brightness
2.
3.
Focus
4.
Clock
H- Position
5.
6.
V- Position
7.
Language
Figure 5
The OSD Message
Adjust the picture contrast.
Adjust the picture brightness.
Adjust picture Focus.
Adjust picture Clock.
Adjust the horizontal position of the picture.
Adjust the vertical position of the picture.
Multi-Language selection
9