Drive System Maintenance; Inspecting The Tires; Torquing The Wheel Lug Nuts; Drive-Motor Gear Oil Specifications - Toro 68037G Operator's Manual

Table of Contents

Advertisement

Battery Service (continued)
Charger Maintenance
All electrical repairs should be performed by an Authorized Service Dealer only.
The charger requires little maintenance other than protecting it from damage and weather.
• Clean the charger cord with a slightly damp cloth after each use.
• Coil the cord when not in use.
• Periodically examine the cord for damage, and replace it when necessary with Toro-
approved parts.

Drive System Maintenance

Inspecting the Tires

Inspect tires for cuts, slashes, or bulges. Tires with defects need to be replaced or repaired
for proper handling and safety.

Torquing the Wheel Lug Nuts

Torque the lug nuts in a crossing pattern.
1. Torque the front lug nuts to 67 to 78 N∙m (50 to 58 ft-lb).
2. Torque the rear lug nuts to 103 to 123 N∙m (76 to 91 ft-lb).

Drive-Motor Gear Oil Specifications

Oil Type
Capacity
Maintenance: Drive System Maintenance
IMPORTANT
Mobil 626 SHC
295.7 ml (10 fl oz) per gearbox
Page 5–10
3465-683 A

Advertisement

Table of Contents
loading

This manual is also suitable for:

68037Ultra buggy e2500

Table of Contents