Raising The Hopper Without Power - Toro 68037G Operator's Manual

Lowering the Hopper without Power (continued)
2. Ensure that the hopper is empty.
3. Remove the bottom cover and place a large drain pan under the hydraulic power unit.
4. Remove the caps off of the hoses to the lift
cylinder and allow the fluid to drain.
Note:
recycling center.
5. Use a hoist or have 2 people hold up the
hopper and remove and store the cylinder lock.
6. Carefully lower the hopper.
7. Install the caps on the hydraulic hoses to
prevent contamination.
8. After making repairs, raise the hopper, install
the cylinder lock, and attach the hoses to the
power unit and install the bottom cover.
9. Add hydraulic fluid.

Raising the Hopper without Power

1. Remove any material from the hopper.
2. Raise the machine and support it using jack stands rated for the weight of the machine.
3. Remove the access panel.
4. Place a large drain pan under the hydraulic power unt.
3465-683A
Dispose of the used fluid at a certified
G380311
G387430
Page 4–9 Operation: After Operation