Table of Contents
Advertisement
Note:
Determine the left and right sides of the machine from the normal operating position.
Maintenance Safety
• Park the machine on a level surface, engage the parking brake (if applicable), shut off the
machine, and remove the key. Wait for all movement to stop and allow the machine to
cool before adjusting, servicing, cleaning, or storing the machine.
• Do not make repairs or adjustments on the machine unless you are specifically trained
and authorized to do so.
• Support the machine with jack stands whenever you work under the machine.
• Carefully release pressure from components with stored energy.
• Use the cylinder lock to secure the hopper in the raised position.
• Never tamper with safety devices.
• To ensure safe, optimal performance of the machine, use only genuine Toro replacement
parts.
• Seek immediate medical attention if fluid is injected into skin. Injected fluid must be
surgically removed within a few hours by a doctor.
• Ensure that all hydraulic-fluid hoses and lines are in good condition and all hydraulic
connections and fittings are tight before applying pressure to the hydraulic system. Keep
your body and hands away from pinhole leaks or nozzles that eject high-pressure
hydraulic fluid.
• Use cardboard or paper to find hydraulic leaks.
• Safely relieve all pressure in the hydraulic system before performing any work on the
hydraulic system.
• Modifying this machine in any manner may affect machine operation, performance,
durability, or its use, and result in injury or death.
• Contain hazardous material spills immediately according to hazardous materials
regulations.
• After performing maintenance on the machine, check its performance in an authorized
area away from vehicular and pedestrian traffic.
• Before returning the machine to service, follow the recommended procedures.
• Regularly inspect a machine designed and approved for use in hazardous areas to
ensure that it has its original and approved safe-operating features.
• Maintain and keep all plates, tags, and decals with capacity, operation, and maintenance
information in legible condition.
• Inspect and maintain the battery, motor, controllers, switches, safety protective devices,
electrical wiring, and connections according to the instructions.
3465-683 A
Page 5–1
Chapter 5
Maintenance
Maintenance
Advertisement
Table of Contents
