Beko BHCA92442BBH User Manual page 14

In intensive ventilation mode, when
any speed key is touched, it returns
to that speed level and continues
to operate.
Operating the lamp
1. Touch the key to operate the lamp.
ð Hood lamp lights. (For Models B and
C) If you touch the
the first 1 minute, the lamp will con-
tinue to light at the low illumination
level. If you touch it again 1 minute
after turning the lamp on, it turns off.
The illumination lamps operate for
a maximum of 12 hours.
Turning off the lamp
1. One minute after turning the hood lamp
on, you can turn it off by touching the
key again.
(For Models B and C) If you touch
the key again within the first 1
minute after the lamp is switched
on, the lamp switches to the low il-
lumination level.
Setting the lamp illumination colour (for
models B and C)
You can use the colour of your hood's illu-
mination lamps in 3 different shades.
1. With the hood lamp turned on, touch
key for more than 2 seconds.
ð The lamp changes to the other
colour shade.
2. If you continue to touch the
will change to the next colour shade
after every 2 seconds. According to the
desired colour shade, stop touching
key when the lamp is in that colour
shade. The colour shade will automat-
ically activate.
key again within
key, it
EN / 14
You can only change the light col-
our shade while the lamp has high
light intensity.
In the event of a power outage,
your hood will remember the colour
shade set and the lamp will work in
the colour that was last set.
Automatic mode (for model C)
Your hood measures the temperature of
the air in the kitchen and the air coming
from your hob by using a sensor. In auto-
matic mode, it determines the required
levels for the temperature of the air from
the hob to match the temperature of the air
in the kitchen and operates at levels de-
termined automatically.
1. To enable the automatic mode touch
the key.
ð The automatic mode is activated
and operates until the temperature
of the air from the hob equals the
ambient temperature. It will switch
off automatically when the tem-
perature equalizes. You must en-
able automatic mode again to re-
switch it on.
While automatic mode is active,
automatic mode will be cancelled
when you turn the product on and
off at any speed.
2. To turn automatic mode off early touch
the key once more.
If you open the cover of the
product when auto mode is on, its
performance will decrease. Do not
open the cover when the automatic
mode is active.