Fig. 4.3
4.1.4 Leveling
The water level test must be done after installing the indoor unit to make the unit is horizontal,
as shown below.
4.2 Installation of the Outdoor Unit
① . Install the unit where it will not be tilted by more than 5°.
② . During installation, if the outdoor unit has to be exposed to strong wind, it must be fixed securely.
4.2.1 Outdoor unit dimension
DC Inverter U-match Series Cassette Type Unit
Fig. 4.4
Horizontal tester
Fig.4.6
WARNING!
D
A
Fig.4.7
10
Fig. 4.5
B