Smeg STL323BL Manual page 26

3.2 Washing programs
Before starting a washing program make sure that:

The water supply tap is open.

The softener container contains regenerating salt.

The correct amount of detergent has been added to the
dispenser.

The baskets have been correctly loaded.

The spray arms are able to rotate freely and without
obstruction.

The dishwasher door is securely closed.
Warning:
during the initial phase of the washing program, the operation of sprayers
is not perceived because they start rotating about 5 minutes after the start.
This is the normal operation of the washing cycle.
OPTION SELECTION
The options can be selected by pressing the relative button, the light turns
on to confirm activation.
All options are deactivated at the end of the wash cycle.
Option
1 SPECIAL
2 DRY ASSIST
3 EXTRA DRY
½ LOAD
4
FLEXY ZONE
5 DELAY
6 SELF CLEAN
User instructions
Allows the dishes to be dried perfectly even at low
rinse temperatures, with significant energy savings. It
starts automatically if the selected program is
compatible with it. If it is not required, press the
Modifies some of the parameters to ensure improved
Ideal if just a few dishes need to be washed, allowing
energy savings and a shorter wash cycle.
Allows the wash cycles 1 or 3 to be delayed by up to
9, 12 or 24 hours depending on the models.
Dishwasher cleaning cycle. Must be started with the
Description
Creates additional programs.
button to disable it.
drying.
machine empty, without dishes.
26