Table of Contents
Advertisement
Pressure Equipment Directive (PED) 2014/68/EU and U.K. Reg. S.I. 2016 No.1105 (as amended)
Machinery Directive 2006/42/EC (Art. 13) and U.K. Reg. S.I. 2008 No.1597 (as amended)
Declaration of incorporation of the partly completed machine (Annex II part B)
With reference to the Machinery Directive 2006/42/EC (Art. 2 point g) and U.K. Reg. S.I. 2008 No.1597 (as amended) (Part 2 point 6),
the pneumatic actuators produced by Air Torque Spa listed below can be classified as "Partly completed machine". We hereby declare that
the products specified below meet the basic health and safety requirements.
Before the actuators are put into operation, the machine into which the actuators will be installed, shall fulfill with the requirements of the
Directive 2006/42/EC and U.K. Reg. S.I. 2008 No.1597 (as amended).
The essential requirements are applied in compliance with the following points of the Machinery Directive and U.K. Regulation:
1.1.3, 1.1.5, 1.2.1, 1.3.2, 1.3.4, 1.3.7, 1.3.8, 1.3.8.1, 1.4.1, 1.4.2.1, 1.5.1, 1.5.2, 1.5.3, 1.5.4, 1.5.7, 1.5.8, 1.6.1, 1.7.2, 1.7.3, 1.7.4
Description of the product line: Pneumatic actuators AIR TORQUE 4thG Upgrade Series
Type: Double acting "D" and Spring return "S".
Actuator models: AT-045U S/D, AT051U S/D ÷ AT1001U S/D (including the product variations).
Serial number: Each Air Torque actuator has a serial number for traceability.
For the use, installation and maintenance of the actuators described above, see the related manual instructions.
Atex Directive 2014/34/EU and U.K. Reg. S.I. 2016 No.1107 (as amended)
The pneumatic actuators produced by Air Torque Spa (Series ATxxxxU) are designed, produced and classified according to Atex Directive
2014/34/EU and U.K. Reg. S.I. 2016 No.1107 (as amended), (see actuator label and safety instructions); their use in areas with
potentially explosive atmosphere is subject to the classification indicated on the label and in compliance with the relevant ATEX safety
instructions.
Product marking (Series ATxxxxU)
Group IIB (Gas)
Group IIIC (Dust)
Group IIC (Gas)
Group IIIC (Dust)
Compliance has been verified on the basis of the requirements of the standards or normative documents indicated below:
Technical file: ATX19AT-RP
Technical file: UKX21AT-RP
Pressure equipment directive (PED) 2014/68/EU and U.K. Reg. S.I. 2016 No.1105 (as amended)
The pneumatic actuators produced by Air Torque Spa (Series ATxxxxU) are designed according to the criteria of Article 1 / Schedule 1
paragraph 2. j) ii) and they are suitable to be used with non dangerous fluids of the Group 2; therefore, according to directive
2014/68/EU and U.K. Reg. S.I. 2016 No.1105, they are not to be considered pressure equipments .
Signed:
Name: A. Marinoni
Position: Managing Director I Design and Quality Manager
AIR TORQUE S.p.A. - ltaly
This data sheet is property of AIR TORQUE S.p.A Costa di Mezzate - Italy and all rights of use and reproduction are reserved.
Due to continuous development product data is subject to change without prior notice.
14-2
EU / UK DECLARATION OF CONFORMITY
Machinery Directive 2006/42/EC and U.K. Reg. S.I. 2008 No.1597 (as amended)
Atex Directive 2014/34/EU and U.K. Reg. S.I. 2016 No.1107 (as amended)
We: AIR TORQUE S.p.A. Via dei Livelli di Sopra, 8/11 - 24060 Costa di Mezzate (BG) ltaly declare:
Execution LLT2, LLT, ST
II 2 G Ex h IIB T6 ... T5 Gb X
ll 2 D Ex h IIIC T85 °C ... T95 °C Db X
II 2 G Ex h IIC T6 ... T5 Gb X
II 2 D Ex h IIIC T85 °C ... T95 °C Db X
EN 1127-1:2019
EN 80079-36:2016
AIR TORQUE S.p.A.
via dei Livelli di Sopra, N° 8/11
24060 Costa di Mezzate (Bg) Italy
Tel.: +39 035 682299
Fax: +39 035 687791
E-mail: info@airtorque.it
In accordance with
EN 15714-3:2009
EN 80079-37:2016
Notified body (EU): INERIS (0080)
Approved body (UK): EUROFINS E&E CML Limited (2503)
Doc. n° ECDDUE
Issued: 01/2022 - Pag: 1/1
Execution HT
II 2 G Ex h IIB T6 ... T3 Gb X
II 2 D Ex h IIIC T85 °C ... T16 5 °C Db X
II 2 G Ex h IIC T6 ... T3 Gb X
II 2 D Ex h IIIC T85 °C ... T16 5 °C Db X
Tab. n° 00_MASTRO MN02
EB 8325 EN
Advertisement
Table of Contents
