Table of Contents
Advertisement
3.
Lift the load lever in the direction of the
arrow until the load plate is completely
lifted.
4.
Position the CPU over the socket,
ensuring that the gold triangle is on the
bottom-left corner of the socket, and
then fit the socket alignment keys into
the CPU notches.
The CPU fits in only one correct
orientation. DO NOT force the CPU
into the socket to prevent bending
the connectors on the socket and
damaging the CPU!
5.
Close the load plate (A), and then push
down the load lever (C), ensuring that
the front edge of the load plate slides
under the retention knob (B).
1-10
Load plate
Gold
triangle
mark
Alignment keys
C
A
Chapter 1: Product introduction
CPU notches
B
Hide quick links:
Advertisement
Table of Contents
