Asus ROG CROSSHAIR VIII IMPACT User Manual page 40

13. System Panel connector
The System Panel connector supports several chassis-mounted functions.
• System Power LED connector (PLED)
The 2-pin connector allows you to connect the System Power LED. The System
Power LED lights up when the system is connected to a power source, or when you
turn on the system power, and blinks when the system is in sleep mode.
• Storage Device Activity LED connector (HD_LED)
The 2-pin connector allows you to connect the Storage Device Activity LED. The
Storage Device Activity LED lights up or blinks when data is read from or written to the
storage device or storage device add-on card.
• Power Button/Soft-off Button connector (PWRBTN)
The 3-1 pin connector allows you to connect the system power button. Press the
power button to power up the system, or put the system into sleep or soft-off mode
(depending on the operating system settings).
• Reset button connector (RESET)
The 2-pin connector allows you to connect the chassis-mounted reset button. Press
the reset button to reboot the system.
1-24
Chapter 1: Product Introduction