Starting The Programme; Interrupting Programme; Terminate Programme; Switching Off Appliance - Siemens SC Series User Manual

Table of Contents

Advertisement

en Basic operation

Starting the programme

Press
.
a The programme has ended when
the display shows "0:00".
Notes
¡ You can only change a pro-
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 30
¡ The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.

Interrupting programme

Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Press
⁠ .
1.
a The programme is saved and the
appliance switches off.
Press
to resume the pro-
2.
gramme.

Terminate programme

To end a programme early or to
switch from a programme that has
already started, you will need to ter-
minate it first.
Press
3 seconds.
a The programme is terminated and
ends after approx. 1 minute.
30
for approx.

Switching off appliance

Please note the information on
1.
Safe use → Page 10.
Press
.
2.
To prevent damage from dripping
3.
water, turn the water tap off tight
(not applicable to appliances with
Aqua-Stop).
Tip: If you press
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
during the wash

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sk seriesSk26e822eu

Table of Contents