Table of Contents
Advertisement
14.3 Setting additional func-
tions
You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
Press the button for the relevant
▶
additional function.
→ "Additional functions", Page 21
The additional function is set and
a
the additional function button
flashes.
14.4 Setting timer program-
ming
You can delay the start of the pro-
gramme by up to 24 hours.
Press
.
1.
Press
or
2.
display shows the right time.
Depending on the setting of the
time display, the end of the pro-
gramme is shown on the display
by "Finish in" (e.g. 3h 25min) or
"Finish at" (e.g. 15:20 hours). You
can change this setting in the Ba-
sic settings.
To activate timer programming,
3.
press
.
Note: To deactivate timer program-
ming, press
4 seconds.
14.5 Starting the programme
Press
.
▶
The programme has ended when
a
the display shows "Finished".
repeatedly until the
for approx.
Notes
If you want to add more tableware
¡
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
You can only change a pro-
¡
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 35
The appliance switches off auto-
¡
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
14.6 Interrupting programme
Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Press
.
1.
The programme is saved and the
a
appliance switches off.
Press
to resume the pro-
2.
gramme.
14.7 Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
Press
▶
4 seconds.
All displays light up.
a
As soon as the displays are off,
a
the display shows "Programme
was terminated." and then "Fin-
ished".
Basic operation en
for approx.
35
Advertisement
Table of Contents
