en Basic operation
15.5 Setting timer program-
ming
You can delay the start of the pro-
gramme by up to 24 hours.
Press
.
1.
"h:01" appears in the display.
a
Use
to set the required start
2.
time for the programme.
Press
.
3.
This activates timer programming.
a
Tip: To deactivate timer program-
ming, press
appears in the display.
15.6 Starting the programme
Press
.
▶
The programme has ended when
a
the display shows "0h:00m".
Notes
If you want to add more tableware
¡
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
You can only change a pro-
¡
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 34
The appliance switches off auto-
¡
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
15.7 Interrupting programme
Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
34
repeatedly until "h:00"
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Open the appliance door carefully.
1.
Press
.
2.
The programme is saved and the
a
appliance switches off.
Press
to resume the pro-
3.
gramme.
Close the appliance door.
4.
15.8 Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
Open the appliance door.
1.
Press
2.
4 seconds.
Close the appliance door.
3.
The programme is cancelled and
a
ends after approx. 1 minute.
15.9 Switching off appliance
Please note the information on
1.
Safe use → Page 10.
Press
.
2.
Tip: If you press
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
for approx.
during the wash