Table of Contents
Advertisement
14.4 Setting timer program-
ming
You can delay the start of the pro-
gramme via the Home Connect app.
Open the Home Connect app and
▶
select the appliance.
You can delay the start of the pro-
gramme under Operation.
14.5 Starting the programme
Press
.
▶
The programme has ended when
a
the display shows "00h:00m".
Notes
If you want to add more tableware
¡
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
You can only change a pro-
¡
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 35
The appliance switches off auto-
¡
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
14.6 Interrupting programme
Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Open the appliance door carefully.
1.
Press
.
2.
The programme is saved and the
a
appliance switches off.
Press
to resume the pro-
3.
gramme.
Close the appliance door.
4.
14.7 Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
Open the appliance door.
1.
Press
2.
4 seconds.
Close the appliance door.
3.
The programme is cancelled and
a
ends after approx. 1 minute.
14.8 Switching off appliance
Please note the information on
1.
Safe use → Page 10.
Press
.
2.
Tip: If you press
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
operation en
for approx.
during the wash
35
Advertisement
Table of Contents
