Table of Contents
Advertisement
Height of tableware
You can place tableware with a max-
imum height of 28 cm in the basket.
Before using for the first time
Before using for the
first time
Configure the settings for initial start-
up.
Performing initial start-up
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Requirement: The appliance has
been installed and connected.
→ Page 12
Add special salt. → Page 22
1.
Add rinse aid. → Page 24
2.
Overview of water hardness settings
You can find an overview of the water hardness values that can be selected
here.
You can find out how hard your water is from your local water company or by
using a water hardness tester.
Water hardness °E
0 - 8
9 - 10
11 - 12
13 - 15
16 - 20
21 - 26
27 - 38
39 - 44
Hardness range
Soft
Soft
Medium
Medium
Medium
Hard
Hard
Hard
Before using for the first time en
Switch on the appliance.
3.
→ Page 29
Set the water softening system.
4.
→ Page 22
Set the amount of rinse aid to be
5.
dispensed. → Page 24
Tip: You can change these settings
and other Basic settings → Page 31
at any time.
Water softening system
Water softening system
Hard water leaves limescale on the
tub and tableware and parts of the
appliance may become blocked.
To ensure good dishwashing results,
you can treat the water with special
salt and the water softening system.
To avoid damage to the appliance,
water with a hardness above 9 °E
must be softened.
mmol/l
0 - 1.1
1.2 - 1.4
1.5 - 1.8
1.9 - 2.1
2.2 - 2.9
3.0 - 3.7
3.8 - 5.4
5.5 - 6.2
Setting value
H:00
H:01
H:02
H:03
H:04
H:05
H:06
H:07
21
Advertisement
Table of Contents
