Zte GPON ONT ZXHN F600 User Manual page 6

Indicator
Internet
LAN1 – LAN4
4
Interface
Figure 4-1 shows the interfaces and buttons of the ZXHN F600 unit.
Figure 4-1 Interfaces and Buttons
Table 4-1 describes the interfaces and buttons on the back panel of the ZXHN
F600 unit.
Table 4-1 Descriptions of the Interfaces and Buttons on the Back Panel
Interface/Button
ON/OFF
Power
Reset
LAN1 – LAN4
PON
Status
Off
Solid red
Flashing red
Off
Solid green
Flashing green
Description
Power switch.
12 V DC power connector.
Reset button, when the power is on, use a needle to press
the button for over 5 seconds to restore the default settings.
RJ-45 Ethernet interface.
PON interface.
Description
The device is not powered on or the ethernet
connection does not exit.
The internet connection has been
established.
The data is transmitted via internet
connection.
The device is not powered on or the network
link is not established.
The network link has been established but
no data is being transmitted or received.
Data is being transmitted or received.