Adjusting The Focus; Adjusting The Projected Image Size - Sharp XG-MB70X Operation Manual

Image Projection

Adjusting the Focus

This projector is equipped with an "Auto Focus"
function that adjusts the focus automatically
when it is turned on. When you want to readjust
the focus after the Auto Focus function has been
activated, you can operate the Auto Focus func-
tion using the following procedure.
Press on the projector or
on the remote control.
• The focus is adjusted automatically after which
the focus pattern is displayed, and the focus
pattern disappears from the screen.
Note
• Auto Focus can be performed over a range
of 40 to 100 inches.
•The ability to adjust the focus automatically
depends on the screen conditions and the
surrounding brightness.
• Adjust the focus manually when the focus
is not adjusted with Auto Focus or when you
want to make fine adjustments.
When adjusting the focus using the buttons
on the projector
1 Press .
2 Adjust by pressing
\ or |.
• When not using the Auto Focus function,
set "Auto Focus" on the "Options2" menu to
"OFF".

Adjusting the Projected Image Size

When adjusting zoom using the buttons
on the projector
1 Press .
2 Adjust by pressing
' or ".
-32
on the remote control
Adjust by pressing the
FOCUS buttons.
on the remote control
Adjust by pressing the
ZOOM buttons.
Auto focus sensor
Auto focus may not function
normally if there is an obstruction
between the auto focus sensor and
the screen, or if there is dirt or dust
on the auto focus sensor. Remove
any obstructions, dirt or dust.
ZOOM buttons
Note
• Manually adjusting the focus or zoom
After you have pressed the FOCUS buttons
or ZOOM buttons on the remote control, or
after you have pressed the ZOOM/FOCUS
button on the projector, you can display the
test pattern by pressing the ENTER button.
The test pattern is useful for making more
accurate adjustments.
ZOOM/FOCUS button
Adjustment buttons
('/"/\/|)
AUTO FOCUS button
FOCUS buttons
AUTO FOCUS
button