Haier HW150-BP14986ES9 User Manual page 10

3-Control panel
Note: Factory settings
To get best results in each programme Haier has well defi ned specifi c default settings.
If there is no special requirement default settings are recommended.
3-7
Delay
8
3-8
Nightwash
Note: Nightwash
Max. speed can be setted is 800 rpm as you add Nightwash to a programme. Easy Iron
is the default setting of Nightwash. Nightwash will be cancelled if Easy Iron is cancelled.
3-9
Steam
3-10
Function
3-11
10
3.5.1-Function button "Delay"
Press this button (Fig. 3-7) to start the programme with a
delay. End time delay could be increased in steps of 30
minutes from 0,5-24h. For example displa y off 6:30 means
end of programme cycle will be in 6 hours and 30 minutes.
Touch "Start/Pause" button to activate the time delay. It is
not applicable to programme "Spin" and "Refresh".
3.5.2-"Nightwash" button
Press this button (Fig. 3-8) to select Nightwash function to
achieve better performance at night. All the acoustic signal
will be turned off , except for failure signal. A 12 hour
dispersing of laundry load is added to the programme as 1
minute left.
3.5.3- "Steam" button
This function (Fig. 3-9) is available on cycles of Cot-
ton, synthetic, Babycare, Mix. When it is selected,
temperature function turns to be unselectable. Icon
will be lighted when above cycles are selected.
3.5.4-"Function" button
Press this button (Fig.3-10) to choose special features.
The symbols are explained below.
Easy Iron
Allergen
3.5.5-Function button "
This function (Fig. 3-11) intensifies different washing
time.The "i-time" can't operate in single washing
function, washing spin function and easy self-cleaning.
Intense
"
EN