Related Manuals for Haier HW60-12829
Summary of Contents for Haier HW60-12829
- Page 1 User manual Washing machine HW60-12829 HW60-14829 HW70-12829 HW70-14829 HW80-12829 HW80-14829 HW100-12829 HW100-14829...
- Page 2 Thank You Thank you for purchasing a Haier Product. Please read these instructions carefully before using this appliance. The instructions con- tain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance.
-
Page 3: Table Of Contents
Content 1-Safety information .......................... 4 2-Product description ........................7 3-Control panel ........................... 8 4-Programmes ..........................11 5-Consumption ..........................12 6-Daily use ............................13 7-Eco-friendly washing ........................18 8-Care and cleaning .........................19 9-Troubleshooting ..........................22 10-Installation ............................25 11-Technical data ..........................29 12-Customer service ........................32... -
Page 4: 1-Safety Information
1-Safety information Before switching on the appliance for the first time read the follow- ing safety hints!: WARNING! Before first use ▶ Make sure there is no transport damage. ▶ Make sure all transport bolts are removed. ▶ Remove all packaging and keep out of children´s reach. ▶... - Page 5 1-Safety information WARNING! Daily use Do not remove or insert the plug in the presence of flammable Do not hot wash foam rubber or sponge-like materials. Do not wash any laundry which is polluted with flour. Do not open detergent drawer during any wash cycle. Do not touch the door during the washing process, it gets hot.
- Page 6 1-Safety information WARNING! Installation Install or use the appliance only where the temperature is above 5 °C. Do not place the appliance directly on a carpet, or close to a wall or furniture. Do not install the appliance in direct sunlight or near of heat sou- rces(e.g.
-
Page 7: 2-Product Description
2-Product description Note: Due to technical changes and different models, the illustrations in the following chap- ters may differ from your model. 2.1 Picture of appliance Front (Fig. 2-1): Rear side (Fig. 2-2): HW70-12829 HW60-14829 HW80-BP14636 Algodón Cotton Cotton Express 15 min Express Express HW80-14829... -
Page 8: 3-Control Panel
3-Control panel 13 12 11 Cotton Express 15min Cotton+ Fast Delicate/ Synthetic Silk Hand wash Jeans Hygienic Sport Babycare Wool Spin Start/ Spin Extra Power Program Temp. Delay Pause speed rinse Function buttons: Indicators: 5 “Temp.” 1 Detergent /Softener drawer Extra rinse indicator 6 “Spin speed”... -
Page 9: Programme Selector
3-Control panel 3.2 “Power“ button Press this button (Fig. 3-2) gently to switch on, the display is illuminated. Press it again for about 2 secon- Power ds to switch off.If no panel element or programme is activated after a while machine will shut down autom- atically. - Page 10 3-Control panel laundry will not be spun. In conjunction with the “Temp.” button, the child lock Express 15min 3.5.3-Function button “Delay” Fast 3-5.3 3-5.4 Delicate/ Press this button (Fig. 3-5.3) to start the programme Silk Hand with a delay. End time delay could be increased in steps wash Hygienic 6:30 means end of programme cycle will be in 6 hours...
-
Page 11: 4-Programmes
4-Programmes Detergent compartment for: Water inlet only, no detergent Detergent Softener or care product • Yes, Optional, º Max. load Temperature Preset spin speed in kg in °C in rpm HW60/ HW70/ HW80/ seletable Programme HW100 range 1 Fibre type •... -
Page 12: 5-Consumption
5-Consumption The indicated consumption values may accordingly differ to local conditions. Programme Model HW Cotton + * Synthetic Temperature 40°C 60°C 60°C 30°C Max. load 60/70 3.0/3.5 3.0/3.5 6.0/7.0 3.0/3.5 in kg 80/100 4.0/5.0 4.0/5.0 8.0/10.0 4.0/5.0 60-12829 0.55 0.71 0.66 60-14829 0.58... -
Page 13: 6-Daily Use
6-Daily use 6.1 Power supply Connect the washing machine to a power supply (220V to 240V~/50Hz; Fig. 6-1). Please refer also to section INSTALLATION. 6.2 Water connection Before connecting check the cleanliness and clar- ity of the water supply. Tun on the tap (Fig.6-2). Note: Tightness Before use check for leakage in the joints between the tap and the inlet hose by turning on the tap. -
Page 14: Care Chart
6-Daily use Care chart Washing Washable up to 95°C Washable up to 60°C Washable up to 60°C normal process normal process mild process Washable up to 40°C Washable up to 40°C Washable up to 40°C normal process mild process very mild process Washable up to 30°C Washable up to 30°C Washable up to 30°C... - Page 15 6-Daily use 6.5 Selecting detergent ▶ Washing efficiency and performance is determined by used detergent quality. ▶ Use only machine wash approved detergent. ▶ If needed use specific detergents, e.g. for synthetic and woolen fabric. ▶ Mind always detergent manufacturer recommendations. ▶...
-
Page 16: Adding Detergent
6-Daily use 6.6 Adding detergent 1. Slide out the detergent drawer. 2. Put the required detergents and fabric condit- ioner into corresponding compartments (Fig. 6-6) 3. Push back the drawer gently. Note: Clean detergent residues before next wash cycle from the detergent drawer. Do not overuse detergent or softener. - Page 17 6-Daily use 6.10 Start wash programme 6-10 Start/ Press “Start/Pause“ button (Fig. 6-10) to start. Appli- Pause ance operates according to present settings. Changes are only possible by cancelling the programme. 6.11 Interrupt - cancel wash programme To interrupt a running programme press gently “Start/Pause“. The LED in the button is flashing.
-
Page 18: 7-Eco-Friendly Washing
7-Eco-friendly washing Environmentally responsible use To achieve best use of energy, water, detergent and time you should use the recom- mended maximum load size. Do not overload (hand width clearance above laundry). For slightly dirty laundry select the Quick Wash programme. Apply exact dosages of each washing agent. -
Page 19: 8-Care And Cleaning
8-Care and cleaning 8.1 Cleaning the detergent drawer Take always care there are no detergent residues. Clean the drawer regularly (Fig. 8-1): 1. Pull out the drawer until it stops. 2. Press the release button and remove the drawer. 3. Flush the drawer with water until it is clean and insert the drawer back in the appliance. - Page 20 8-Care and cleaning 8.5 Long periods of disuse 8-5.1 8-5.2 If the appliance is left idle for a longer period: 1. Pull out the electrical plug (Fig. 8-5.1). 3. Open the door to prevent formation of moisture and odours. Leave door open while not used. Before next use check carefully power cord, water inlet and drain hose.
- Page 21 8-Care and cleaning 8-6.7 8-6.8 (Fig. 8-6.7). Refit the filter and tighten full to prevent leaks. 11. Close service flap. CAUTION! Pump filter sealing has to be clean and undamaged. If the filter is not full tightened, water can escape.
-
Page 22: 9-Troubleshooting
9-Troubleshooting of a problem please check all shown possibilities and follow below instructions before you contact an after sales service. See CUSTOMER SERVICE. WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. improper repairs can cause considerable consequential damages.. A damaged power cable should only be replaced by the manufacturer, its service 9.1 Information codes Following codes are displayed only for information referring to the washing cycle. - Page 23 9-Troubleshooting Problem Cause Solution • Motor - error. • Contact the After sales service. FC0 , FC1 or Abnormal communication error. • Contact the After sales service. • • Unbalanced load - error. • Reduce the load. 9.3 Troubleshooting without display code Problem Cause Solution...
- Page 24 9-Troubleshooting Problem Cause Solution Automatic adjust- • Washing programme duration will • This is normal and doesn‘t af- ment of washing be adjusted. fect functionality. time. Spinning fails. • Unbalance of laundry. • Check machine load and laun- dry and run a spinning pro- gramme again.
-
Page 25: 10-Installation
10-Installation 10.1 Preparation Take the appliance out of the packaging. Remove all packaging material including polystyrene base, keep them out of childrens reach. While opening the package, water drops may be seen on plastic bag and port- hole. This normal phenomenon results from water tests in the factory. Note: Packaging disposal Keep all packaging materials out of children´s reach and dispose them in an environmen- tally friendly manner. - Page 26 10-Installation 3. Replace back cover by inserting it in the two gaps 10-3.3 10-3.4 its convex is facing out (Fig. 10-3.3). 4. Fill left holes with blanking plugs (Fig. 10-3.4). Note: Keep in safe place Keep the transportation bolts in a safe place for later reinstall the bolts.
- Page 27 10-Installation 10.6 Drain Water Connection Fix the water drain hose properly to the piping. The hose has to reach at one point a height between 80 and 100 cm above the appliance bottom line! If possible keep always drain hose fixed to the clip at the appliance back. WARNING! ▶...
- Page 28 10-Installation 10.7 Fresh Water Connection 10-7.1 10-7.2 Make sure that the gaskets are inserted. 1. Connect the water inlet hose with the angled end to the appliance (Fig. 10-7.1). Tighten the screw joint by hand. 2. The other end connect to a water tap with a 3/4“ thread (Fig.
-
Page 29: 11-Technical Data
11-Technical data 11.1 Product fiche according to regulation EU No. 1061/2010 Suppliers name or trade mark Haier HW60- HW70- HW80- HW100- Supplier´s model identifier 12829/ 12829/ 12829/ 12829/ 14829 14829 14829 14829 Rated capacity (kg) Energy efficiency class A+++ Energy consumption per year (AE... - Page 30 11-Technical data 11.2 Additional technical data HW60-12829 HW70-12829 HW80-12829 HW100-12829 HW60-14829 HW70-14829 HW80-14829 HW100-14829 Dimension in mm Height Width Depth Voltage in V 220-240 V~/50Hz Current in A Max power in W 2050 Water Pressure 0.03≤P ≤1 in MPa Max. water inlet-...
- Page 31 Do not use a multiple socket extension cord. A separate earthed socket is required which shall be accessible at all times. If the mains cord becomes damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person with a lead of the same type and rating to avoid a hazard. Never remove the plug from the socket by pulling on the cord, always grasp the plug.
-
Page 32: 12-Customer Service
12-Customer service We recommend our Haier Customer Service and the use of original spare parts. your local dealer or and FAQs and where you can activate the service claim. To contact our Service, ensure that you have the following data available. - Page 33 0020506943EY...