Changing The Exposure And Original Image Type - Sharp MX-M283 Operation Manual

CHANGING THE EXPOSURE AND ORIGINAL IMAGE
TYPE
The exposure and original image type can be set appropriately for the original to enable optimum scanning.
Refer the following tables to select appropriate settings.
How to select the exposure
Exposure
Auto
1-2
Manual 3
4-5
How to select the original image type (Scan mode, USB memory mode and Data entry mode)
Setting
Text/Prtd. Photo
Text/Photo
Text
Photo
Printed Photo
Map
Select the mode and display the exposure settings screen.
(1) Touch the tab of the mode that you wish to use.
1
(2) Touch the [Exposure] key.
☞
IMAGE SETTINGS
When Fax/I-Fax address is included,
exposure setting shared among Fax/
I-Fax/ Scanner mode is selected.
2
If a broadcast transmission is performed that includes both scan mode destinations and Internet fax destinations, the
exposure settings for Internet fax mode will have priority.
This setting automatically adjusts the exposure for light and dark parts of the original. (Only
when mono2 is set.)
Select this setting when the original consists of dark text.
Select this setting for a normal original (neither dark nor light).
Select this setting when the original consists of faint text.
This mode provides the best balance for scanning an original which contains both text and
printed photographs, such as a magazine or catalogue.
This mode provides the best balance for scanning an original which contains both text and
photographs, such as a text document with a photo pasted on.
Use this mode for regular text documents.
Use this mode to scan photos.
This mode is best for scanning printed photographs, such as photos in a magazine or
catalogue.
This mode is best for scanning the color shading and fine details found on most maps.
(page 5-53)
OK
When to select
Description
Read the displayed message and touch
the [OK] key.
This message does not appear in USB memory mode or
Internet fax mode. Go to the next step.
5-61
SCANNER/INTERNET FAX
Contents