Operation - XTM XTM40 Operating Manual

Operation

6 Operation
6.1 Before initial use
I
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter "Cleaning and maintenance" on page 20).
Mounting the handles
5
The handles are enclosed unassembled. If you wish to attach the handles, proceed
as follows:
➤ Assemble each handle by putting two holders (1) and a handle (2) together.
➤ Fasten the grip with the enclosed screws in the holes provided.
Selecting the temperature units
You can switch the temperature display between Celsius and Fahrenheit. This is how
to do it:
➤ Switch on the cooler.
➤ Press the "SET" button (fig. 3 4, page 10) twice.
➤ Use the "UP +" (fig. 3 6, page 10) and "DOWN –" (fig. 3 7, page 10) buttons
to select Celsius or Fahrenheit.
12
1
2
1
XTM40