Parameter List For Tcp/Ip - ABB RELION 650 Series Communication Protocol Manual

Section 4
DNP3 parameters
Name Values (Range)
tRTSWarmUp 0.000 - 60.000
tRTSWarmDown 0.000 - 60.000
tBackOffDelay 0.000 - 60.000
tMaxRndDelBkOf 0.000 - 60.000
4.2.2
Table 13: CH1TCP Non group settings (basic)
Name Values (Range)
Operation Disabled
TCP/IP
UDP-Only
TCPIPLisPort 1 - 65535
UDPPortAccData 1 - 65535
UDPPortInitNUL 1 - 65535
UDPPortCliMast 0 - 65535
Table 14: CH1TCP Non group settings (advanced)
Name Values (Range)
ApLayMaxRxSize 20 - 2048
ApLayMaxTxSize 20 - 2048
Table 15: CH2TCP Non group settings (basic)
Name Values (Range)
Operation Disabled
TCP/IP
UDP-Only
TCPIPLisPort 1 - 65535
UDPPortAccData 1 - 65535
UDPPortInitNUL 1 - 65535
UDPPortCliMast 0 - 65535
38
Unit Step
s 0.001
s 0.001
s 0.001
s 0.001

Parameter list for TCP/IP

Unit Step
- -
- 1
- 1
- 1
- 1
Unit Step
- 1
- 1
Unit Step
- -
- 1
- 1
- 1
- 1
Default Description
0.000 RTS warm-up in s
0.000 RTS warm-down in s
0.050 RS485 back-off delay in s
0.100 RS485 maximum back-off random delay in s
Default Description
Disabled Operation mode
20000 TCP/IP listen port
20000 UDP port to accept UDP datagrams from
master
20000 UDP portfor initial NULL response
0 UDP port to remote client/master
Default Description
2048 Application layer maximum Rx fragment size
2048 Application layer maximum Tx fragment size
Default Description
Disabled Operation mode
20000 TCP/IP listen port
20000 UDP port to accept UDP datagrams from
master
20000 UDP port for initial NULL response
0 UDP port to remote client/master
1MRK 511 413-UUS B
PID-4130-SETTINGS v7
PID-4131-SETTINGS v7
650 series 2.2 ANSI
Communication protocol manual