1MRK 511 413-UUS B
650 series 2.2 ANSI
Communication protocol manual
For example, to navigate between the options, use
•
HMI menu paths are presented in bold.
For example, select Main menu/Settings.
•
LHMI messages are shown in Courier font.
For example, to save the changes in non-volatile memory, select Yes and press
.
•
Parameter names are shown in italics.
For example, the function can be enabled and disabled with the Operation setting.
•
Each function block symbol shows the available input/output signal.
•
the character ^ in front of an input/output signal name indicates that the
signal name may be customized using the PCM600 software.
•
the character * after an input signal name indicates that the signal must be
connected to another function block in the application configuration to
achieve a valid application configuration.
•
Dimensions are provided both in inches and millimeters. If it is not specifically
mentioned then the dimension is in millimeters.
Section 1
Introduction
and
.
9