Table of Contents
Advertisement
• Repeat
The number of repeats is displayed, starting at "2" and incremental with each repeat. When you have
registered ten times, the display will show "0". (2
• Sentinel mark
When amount in the drawer reaches the amount you preprogrammed, the sentinel mark "X" is displayed
to advise you to remove the money to a safe place.
• Power save mark
When the cash register goes into the power save mode, the power save mark (decimal point) lights up.
• Function message display area
Item labels of departments and PLU/UPCs and function texts you use, such as %1, (-) and CASH are
displayed. For the details of function texts, please refer to pages 48 and 49.
When an amount is to be entered, ------ is displayed at the numeric entry area with a guidance message
"ENTER PRICE".
• Numeric entry display area
Numbers entered using numeric keys are displayed here.
Date and time display
Date and time appear on the display in the OP X/Z, REG, or MGR mode. In the REG or MGR mode, press
s
the
key to display the date and time.
Backlight of the LCD display
When an error occurs or the
red.
Error message
When an error occurs, the corresponding error message is displayed in the function message display area.
For details of error messages, please refer "Error message table" on page 79.
Customer display
(Pop-up type)
6
Drawer Lock Key
This key locks and unlocks the drawer. To lock it, turn 90
degrees counterclockwise. To unlock it, turn 90 degrees
clockwise.
f
v
or
key is pressed or enter the void mode, the green backlight will turn
➞ 3 ......9 ➞ 0 ➞ 1 ➞ 2...)
7
Advertisement
Chapters
Table of Contents
