Sharp XE-A505 Instruction Manual page 39

Commission group number
• A commission group (0 to 2, 0: non commission) can be assigned to each department for commission for
clerks. Each commission amount for each clerk is calculated based on a programmed commission rate and
later printed on clerk reports.
Tax status (taxable 1 through 4 / non-taxable)
• When any entry of a taxable department is made in a transaction, tax is automatically computed according to
the associated tax table or rate.
SICS (Single Item Cash Sale)
• If an entry of a department programmed for SICS is made first, the sale will be finalized as a cash sale as
soon as the department key is pressed. If the entry is made after entering a department not programmed for
SICS, the sale will not be finalized until the
Entry digit limit
• Set the number of allowable digits for the maximum entry amount for each department. The limit is effective
for operations in the REG mode and can be overridden in the MGR mode.
Example: Programming department 2 as normal dept. group 1, commission group 1, taxable 1, SICS, negative
department, entry digit limit - 7 digits, and allowing open & preset entry.
(ABCDEFGHIJK: 01100011173)
Key operation example
01100011173
Preset unit price
To program zero
*To program departments 21 through 40, press the department shift key.
For department 41-99:
Dept. code
To program another department, start from the beginning without pressing the
Key operation example
If a department is not programmed to allow the entry of preset unit prices in functional
programming, the department is automatically changed to allow the entry of preset unit prices by
this programming entry.
A
@
™ A
Unit price
(max. six digits)
d
¡
1000
A
key is pressed.
Dept. group
Commission group
*
D
To program zero
s
Unit price
(max. six digits)
Print
From left, AHJK
Tax status
Sign(I)
A
Dept. key
A
A
key.
Print
Unit price
37