Installing A Paper Roll - Sharp XE-A202 Instruction Manual

3.
Insert three new "AA" batteries as illustrated at the right.
When the batteries are properly installed "
4.
Close the battery compartment cover.
Be sure to observe precautions shown on
batteries.
4

Installing a paper roll

Precaution: The paper cutter is mounted on the printer cover. Take caution when removing and
The register can print receipts or journals. For the printer, you must install the paper roll provided with the
register, even when you program the register for not printing receipts or journals.
Install the paper roll according to the procedure shown below with the AC cord connected and the mode switch
set to the REG position:
1.
Lift up the print roller release lever to unlock and open the
print roller arm.
2.
Set a paper roll in the paper roll cradle as illustrated at the
right.
3.
Feed the end of the paper along with
the paper positioning guides as
illustrated at the right.
8
installing the cover.
" on the display will disappear.
page 1 when handling
Paper positioning guides
Print roller arm
Print roller
release lever
To the printer
Correct
To the printer
Incorrect