Entry Digit Limit For R , R And T; C , C And A (When Using As Ca Key) - Sharp XE-A202 Instruction Manual

Entry digit limit for
r R
• For , enter 0 to 9 (digits), and for
t
and 7 for are set.
Entry digit limit is in effect for REG mode operation but can be overridden in the MGR mode. The entry digit
limit is represented by the number of allowable digits for maximum entry or total amount. When "0" is set, the
operation of the corresponding key is prohibited.
Key operation example
Function parameters for
*1:Item:
A Footer printing
B Amount tendered entry
C Entry digit limit
Footer printing
• This programming decides whether or not the machine should print a message at the foot of a receipt when a
specified media key is used. With regard to programming method of footer logo message, refer to "Logo
messages" section on
Amount tendered entry
• You may select amount tendered, compulsory or optional, for the
• You may select amount tendered, compulsory or inhibited, for the
Entry digit limit
c C
• For the and
program upper limit entry for total cash amount which can be handled on the register. The entry digit limit is
in effect for REG mode operation but can be overridden in the MGR mode. The entry digit limit is represented
by the number of allowable digits for the maximum entry or total amount. When "0" is set, the operation of the
corresponding key is prohibited.
Key operation example
38
r R
, and
@
Entry digit limit
t
@
4
R A
C c
,
To program "0" for all items
@
1
* ABC
To program for another key
page 43.
keys, program upper limit entry amount for the tendered amount. For the
@
018
C A
t
r R
,
or
(manual tax), enter 0 to 7 (digits). By default, 9 for
A
and
(when using as CA key)
2
*
s C c
,
or
s
2
* :Press key for CA key setting.
Selection:
Allow
Disallow*
Compulsory
Non-compulsory (for the CA or CHK keys)*
Inhibit (for the CH key)*
A
c
t A
(only for manual entry)
Print
A
Entry:
1
0
1
0
0
0-8 (default: 8)
C
and keys.
key.
Print
ABC (A:0, B:1, C:8)
r R
and
A
key,