Tax Programming For Automatic Tax Calculation Function; Tax Programming Using A Tax Rate - Sharp XE-A202 Instruction Manual

Time
For setting the time, enter the time in 4 digits using the 24-hour format. For example, when the time is set to
2:30 AM, enter 230; and when it is set to 2:30 PM, enter 1430.
Key operation example
In the display, current time is displayed in 12-hour format. For AM time, " " and for PM time " "
will appear in the rightmost position with the current time. If you want to display time in the 24-hour
format, refer to "Various Function Selection Programming 1" section

Tax Programming for Automatic Tax Calculation Function

2
The cash register can support US and Canadian tax systems. If you use the Canadian tax system,
you must first change the tax system, then program the tax rate or tax table and quantity for
doughnut exempt which are described in this section. For changing your cash register's tax
system, please refer to "Various Function Selection Programming 1" section
Before you can proceed with registration of sales, you must first program the tax that is levied in accordance
with the law of your state. The cash register comes with the ability to program four different tax rates. In most
states, you will only need to program Tax 1. However if you live in an area that has a separate local tax (such
as a Parish tax) or a hospitality tax, the register can be programmed to calculate these separate taxes.
When you program the tax status for a department, tax will be automatically added to sales of items assigned to
the department according to the programmed tax status for the department. You can also enter tax manually.
There are two tax programming methods. The tax rate method uses a straight percentage rate per dollar. The
tax table method requires tax break information from your states or local tax offices. Use the method which is
acceptable in your state. You can obtain necessary data for tax programming from your local tax office.

Tax programming using a tax rate

The percent rate specified here is used for tax calculation on taxable subtotals.
s
Tax rate
(0.0000 to 100.0000)
To delete a tax rate, use the following sequence:
s
28
Time(max. 4 digits in 24-hour format)
s
1430
9 @
When the lowest taxable amount is zero
@
9 @
s
Tax number (1 to 4)
Lowest taxable amount
(0.01 to 999.99)
Tax number (1 to 4)
Print
Time
(Job code 61).
(job code
@
s A
@ v
70).
A