Nvidia ConnectX-6 User Manual page 18

Link Indications
LED and State
1Hz blinking Yellow
4Hz blinking Yellow
LED0 -
Link Speed
LED1 -
Activity
Beacon command for locating the adapter card
Indicates an error with the link. The error can be one of the following:
Error Type Description
2 2
I C I C access to the networking ports
fails
Over-current Over-current condition of the
networking ports
• A constant Green indicates a link
• A constant Yellow indicates a link
• If LED0 is off, then the link has not been established.
• A blinking Green indicates a valid link with data transfer.
• If LED1 is off, then there is no activity
Description
LED Behavior
Blinks until the error is fixed
Blinks until the error is fixed
with the maximum networking speed.
with less than the maximum networking speed
18