Advertisement
Available languages
Available languages
Installation and Operating Instructions
EN
m
NOTE
m
NOTE
m
NOTE
Hydraulic Unit WHSH HE 24V (0-10V)
Hold the push button ü down for three seconds. All level indicator ö and operating mode ùäë LEDs will flash alternately while the
mode is active.
The LED display will show the previously set pump values after venting.
Button lock: Hold the push button ü down for 8 seconds. When the button lock is active, the set operating level ö and selected
operating mode ùäë LEDs will switch on and off alternately for one second (flash).
If the power supply is interrupted, all settings/displays remain saved.
Manual restart (duration approx. 10 minutes): Hold the push button ü down for 5 seconds. The individual operating level ö and
operating mode ùäë LEDs will flash one after the other (running light). Hold the push button ü down for 5 seconds to cancel the
manual restart.
The LED display will show the previously set pump values after the restart.
Tip: For further pump information (e.g. pump characteristic curve), simply scan the QR code on the pump with your smartphone.
Fig. 16
1 m = 10 kPa
10
Fig. 17
Advertisement
Chapters
