Beko SLGR 30523SS Owner's Manual page 43

INSTALLATION
• Ensure the anti-tip device is re-engaged
when the range is moved.
• Do not operate the range without the
anti-tip device in place and engaged.
• Failure to do so can result in death or
serious burns to children or adults.
Warning: Read carefully and follow the
!
instructions below.
Bracket Installation Option 1
1. Adjust your oven feets according to your
counter.
2. Fix the part2 of the bracket to the floor
with 4 screws (5) in accordance with the
dimensions and direction indicated in
Figure 1.
3. Hook up part 1 of the bracket to the place
on back side of the oven as shown as
Figure2. Decide the hole on part 2 to which
the part 1 will be secured. Complete the
installation by tightening parts 3 and 4.
4. Position the appliance on its place after
completing the installation.
5. Check whether the appliance is locked
with bracket by gently lifting it up from
rear side to front side
15