Using The Unit - Stihl FCS-KM Instruction Manual

English
3.8 Cutting Attachments and
Deflectors
The arrow on the deflector shows the direction of
rotation of the blade – see "Using the Unit".
Operate the edger only with the skirt properly
mounted on the deflector – see "Replacing the
Skirt".
Handle the blade with care – see "Using the
Unit".
Best cutting results: At full throttle working at a
steady pace.
STIHL recommends you use only original STIHL
cutting blades – see "Special Accessories".
Only use deflectors or accessories that are
explicity approved for this power tool by STIHL or
are technically identical.
4

Using the Unit

6
Your power edger is designed to produce sharp
contoured borders around lawns and flower
beds. It will cut almost all types of grass, weeds
and soft green plants.
4.1 Preparations
If the work area is very dry, spray it lightly with
water: this softens the soil and ensures that less
dust is created. Slightly damp green plants are
easier to cut.
WARNING
Clear away all obstacles and solid objects from
the work area.
► Plan the best route for edging. Always hold
and operate your edger on the right-hand side
of your body.
4.2 Adjusting Depth of Cut
A
► Shut down the engine.
► Loosen the wingnut (1) counterclockwise.
► Push wheel (2) upwards to increase the depth
of cut (A) or downwards to reduce the depth of
cut (A).
4 Using the Unit
2
1
0458-472-0121-E