Changing The Battery - Fujitsu LIFEBOOK S937 User Manual

CHANGING THE BATTERY

Before changing the battery pack, turn
off the notebook and disconnect the AC
adapter from it. To avoid shock hazards
and damage to your notebook, be
careful not to touch internal components
of the notebook, including the battery
connector.
You can install an optional battery module.
1. Turn off the notebook and disconnect the AC
adapter from it.
2. Close the LCD panel and place the notebook
upside down.
Close the LCD panel gently. Do not
exert excessive pressure to it. Failure to
do so may damage the LCD panel.
3. Unlock the battery cover.
While pressing the latches that lock the
battery, push the battery outwards in the
direction of the arrow as shown.
14
4. Open the battery cover.
5. Remove the battery pack.
6. Install a new battery pack.
Press the latches on the battery pack and
align it to fit into the battery compartment
of the notebook. When the battery falls in
place, push the battery inwards as shown
and releases the latches.
After removing the battery, please take
necessary precautions to prevent it from
being shorted. For example, you can
seal the connector ends with insulating
tape. After removing the battery pack,
do not mix it with other types of battery.
The internal battery pack contains
recyclable material.