Changing The Internal Battery Pack - Fujitsu lifebook S6311 User Manual

CHANGING THE
INTERNAL BATTERY
PACK
Before changing the internal battery pack,
turn off the notebook and disconnect the
AC adapter from it. To avoid shock
hazards and damage to your notebook,
be careful not to touch internal
components of the notebook, including
the battery connector.
RELATED ITEM
• You can install optional modular bay battery.
Changing the internal battery
pack
1. Turn off the notebook and disconnect the
AC adapter from it.
2. Close the LCD panel and place your
notebook upside down.
Close the LCD panel gently. Do not exert
excessive pressure to it. Failure to do so
may damage the LCD panel.
3. Remove the battery pack.
While pressing the latches that lock the
battery, push the battery outwards in the
direction of the arrow as shown.
LB_GAURA (19-23) EN
4. Install a new battery pack.
19
U s e r - I n s t a l l a b l e Fe a t u r e s
Press the latches on the battery pack and
align it to fit into the battery compartment of
the notebook. When the battery falls in place,
push the battery inwards as shown and
releases the latches.
After removing the internal battery pack,
please take necessary precautions to
prevent it from being shor ted. For
example, you can seal the connector ends
with insulating tape. After removing the
battery pack, do not mix it with other types
of battery.
The internal battery pack contains
recyclable material.
13/11/06, 05:33 pm
19