Smartcard Reader; Changing The Battery - Fujitsu LIFEBOOK E5513 User Manual

Hide thumbs Also See for LIFEBOOK E5513:
Table of Contents

Advertisement

Smartcard reader

Smartcards are not supplied as standard equipment. You can use all Smartcards that comply with
the ISO standard 7816-1, -2 or -3. These Smartcards are available from various manufacturers.
With the appropriate software you can use your Smartcard as an alternative to password
protection, but also as a digital signature, for encrypting your e-mails or for home banking.
We recommend that you always use two Smartcards. Always keep one of the Smartcards in a safe
place if you are carrying the other Smartcard with you.
Inserting the Smartcard
Do not use force when inserting and removing the Smartcard.
Make sure that foreign objects do not fall into the Smartcard reader.
36
Slide the Smartcard into the Smartcard
reader with the chip facing upwards (on
some variants it faces down) and to the
front.

CHANGING THE BATTERY

C A U T I O N
Before changing battery bay, remember to
AC adapter from it.
Keep small objects, such as a cover,
caps and screws, out of the reach of
babies and children. These small objects
may suffocate a baby or child if they are
swallowed accidentally. Should such
an accident happen, consult a doctor
immediately.
I M P O R T A N T
After removing the battery, please take
necessary precautions to prevent it from
being shorted. For example, you can seal
the connector ends with insulating tape.
After removing the battery pack, do not mix
it with other types of battery. The internal
battery pack contains recyclable material.
Using Your LIFEBOOK
7U13A3 / 7U14A3 / 7U15A3
1. Turn off the notebook and disconnect
the AC adapter from it.
2. Close the panel and place the notebook
upside down.
3. Unscrew the bottom cover.
4. Unscrew the battery
5. Replace the new battery and screw up the
battery
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lifebook e54135e15a35e14a3Lifebook u94/a9u14a4

Table of Contents