Fujitsu Lifebook S935 Operation Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. Lifebook S935
  6. Operation manual

Fujitsu Lifebook S935 Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
System
Operating Manual
FUJITSU LIFEBOOK S935

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu Lifebook S935

Summary of Contents for Fujitsu Lifebook S935

  • Page 1 System Operating Manual FUJITSU LIFEBOOK S935...
  • Page 2 You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
  • Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2014. All rights reserved. Publication Date 12/2014 Order No.: A26391-K402-Z320-1-7619, edition 1...
  • Page 5 FUJITSU LIFEBOOK S935 Operating Manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility Troubleshooting and tips Technical Data Manufacturer’s notes...
  • Page 6 Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.

  • Page 7: Table Of Contents

    Using the power-management features ........... 41 Fujitsu...
  • Page 8 Preparing to remove components ............68 Fujitsu...
  • Page 9 DOC (Industry CANADA) notices ........... . . 85 FCC regulatory information for notebooks with radio device ......87 Fujitsu...
  • Page 10 Index ................. . 90 Fujitsu...

  • Page 11: Innovative Technology

    The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.

  • Page 12: Notational Conventions

    "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...

  • Page 13: Ports And Controls

    9 = Speakers 3 = Webcam LED 10 = Memory card slot 4 = Microphone 11 = Touchpad buttons 5 = Status indicators 12 = SmartCard slot 6 = Eco button 13 = Touchpad (NFC optional) 7 = ON/OFF switch Fujitsu...
  • Page 14 5 = USB port 3.0 with charging function (Anytime USB charge) 3 = VGA monitor port Right side 1 = Combined headphone/microphone port 4 = USB port 3.0 2 = USB port 3.0 5 = Security Lock device 3 = Module bay with optional optical drive Fujitsu...
  • Page 15 Ports and controls Bottom 1 = Memory service compartment 3 = Battery cover (SIM card under the battery) 2 = Module bay release button 4 = Port Replicator port Fujitsu...

  • Page 16: Important Notes

    (e.g. petrol station, paintshops), as the transmitted radio waves can cause an explosion or a fire. For information on how to switch radio components on and off, see chapter "Switching the wireless components on and off", Page Fujitsu...

  • Page 17: Energy Saving

    ► Enquire with the corresponding government office of the country you will be travelling in as to whether you may operate the radio component integrated in your notebook there (see also "CE marking", Page 83). Fujitsu...

  • Page 18: Notebook: Transporting

    The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. To clean the keyboard and the touchpad, if available, you can use disinfectant wipes. Ensure that no liquid enters the device. Fujitsu...

  • Page 19: First-Time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu...

  • Page 20: Selecting A Location

    ► Connect the power cable (1) to the mains adapter. ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...

  • Page 21: Switching On The Device For The First Time

    If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet under "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".

  • Page 22: Working With The Notebook

    Please refer to the notes in "Important notes", Page Status indicators and battery button Statusindicator panel The LEDs of the status indicators provide information about the status of the power supply, the drives and the keyboard functions. Fujitsu...
  • Page 23 The mains adapter is connected and the battery or batteries installed is/are being charged. Indicator is Orange: The mains adapter is connected and the battery or batteries flashing installed cannot be charged (the battery is too hot for charging). Indicator is not The mains adapter is not connected. Fujitsu...
  • Page 24 50% of maximum capacity. Red: The notebook is in suspend mode and power is being supplied by the first battery. The first battery is charged to between 0% and 12% of maximum capacity. Indicator is not The first battery is not installed. Fujitsu...
  • Page 25 Indicator is lit key has been pressed. The virtual numerical keypad is activated. You can output the characters indicated on the upper right of the keys. Indicator is not key has not been pressed. The virtual numerical keypad is not active. Fujitsu...
  • Page 26 Indicator is not The radio components are switched off. Energy saving functions indicator The indicator is The energy saving functions are enabled (e.g. reduce screen brightness). illuminated: The indicator is The energy saving functions have been disabled. not illuminated Fujitsu...

  • Page 27: Switching On The Notebook

    Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. Notebook ► If the notebook is not switched off automatically, press the ON/OFF switch for approx. five seconds. ► Close the LCD screen. Fujitsu...

  • Page 28: Keyboard

    The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu...
  • Page 29 The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor controlkeys Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu...

  • Page 30: Virtual Numeric Keypad

    The keyboard layout shown below may differ from your actual device. 1 = Valid characters when the 2 = Valid characters when the key is not activated key is activated Further information about the status indicators can be found in chapter "Status indicators and battery button", Page Fujitsu...

  • Page 31: Key Combinations

    Fn+F6 Screenbrightness This key combination decreases the brightness of the screen. Increase screen brightness Fn+F7 Screenbrightness This key combination increases the brightness of the screen. Decrease volume Fn+F8 Volume This key combination reduces the volume of the integrated loudspeakers. Fujitsu...

  • Page 32: Country And Keyboard Settings

    This key combination moves the cursor back to the previous tabular stop. Shift+Tab Backtab Key combinations using the Windows keys are detailed in the manual for your operating system. Country and keyboard settings ► Change the country and keyboard settings as described in the documentation for your operating system. Fujitsu...

  • Page 33: Eco Button

    After pushing the key the battery indicator LED lights up for a few seconds. The color depends on the remaining battery capacity. For a description of the LED color, see "Status indicators and battery button", Page Fujitsu...

  • Page 34: Touchpad And Touchpad Buttons

    ► Tap the touchpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu...

  • Page 35: Dragging Items

    LCDscreen Notes High-quality LCD screens (TFT) are installed in Fujitsu notebooks. For technical reasons, these screens are manufactured for a certain resolution. An optimum and sharp image can only be ensured with the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear picture.

  • Page 36: Using Fingers

    fingers together. Data must be entered for some apps, for Input fields instance an Internet page or your name and password. ► Tap on the input field. An on-screen keyboard opens, with which you can enter your data. Fujitsu...

  • Page 37: Webcam

    LCD screen may flicker while the light level is adjusted. Further information on using the webcam and on the additional settings which are possible for your webcam can be found in the help function of the program which uses the webcam. Fujitsu...

  • Page 38: Rechargeable Battery

    Never store the batteries in the device. Removing and installing the battery Only use batteries approved by Fujitsu for your notebook. Never use force when fitting or removing a battery. Make sure that no foreign bodies get into the battery connections.
  • Page 39 ► Open the battery cover (1). ► Slide the release button in direction of the arrow (2). ► Slide the release button in the direction of the arrow (3) and hold it in place. ► Remove the battery from the battery compartment (4). Fujitsu...
  • Page 40 ► Slide the release button in the direction of the arrow (2). The battery cover can only be closed if the battery is locked. ► Insert the catches of the battery cover into the openings on the device (3). Fujitsu...

  • Page 41: Module

    The module can now be removed without any further actions being necessary. Removing a module Module Drive WeightSaver ► Slide the release mechanism (1) in the direction of the arrow and hold. ► Pull the module (2) out of the module bay. Fujitsu...

  • Page 42: Installing A Module

    Avoid storing a data carrier in areas subject to high temperatures or humidity. You can use data carriers with a diameter of 8 cm / 3.15" or 12 cm / 4.7" in the drive. When using a data carrier of lesser quality, vibrations and reading errors may occur. Fujitsu...

  • Page 43: Cd/Dvd Indicator

    ► Gently pull the drive tray (2) completely out. ► Place the data carrier in the drive tray with the printed side facing upwards. ► Remove a data carrier that has been inserted. ► Push in the drive tray until you feel it lock into place. Fujitsu...

  • Page 44: Manual Removal (Emergency Removal)

    ► Switch your notebook off. ► Push a pen or a piece of wire (such as a paperclip) firmly into the opening (1). The drive tray is ejected. You can now pull the drive tray (2) out of the drive. Fujitsu...

  • Page 45: Using The Power-Management Features

    If you do not intend to use your notebook for a long period of time: ► Exit power saving mode if necessary via the mouse or keyboard or by switching on the notebook. ► Close all opened programs and completely shut down the notebook. Fujitsu...

  • Page 46: Memory Cards

    (see the documentation for your operating system). ► On devices with card locking: Press on the storage card (1). Memory card The storage card is released and can now be removed. ► Pull the storage card out of the slot (2). Fujitsu...

  • Page 47: Loudspeakers And Microphones

    ► Insert the SIM card (a) into the SIM card holder as the diagram on the SIM card holder shows. ► Push the SIM card holder back into the bay (2). ► Complete the installation, see chapter "Finishing component removal", Page Fujitsu...

  • Page 48: Removing The Sim Card

    ► Complete the removal, see chapter "Finishing component removal", Page Wireless LAN/Bluetooth/UMTS/LTE/NFC radio components The installation of radio components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off ► Press the key combination to start the WirelessSelector.

  • Page 49: Setting Up Wlan Access

    If you did not order a UMTS / LTE module, you can purchase the accessories for UMTS / LTE reception from your retailer or your Fujitsu Technology Solutions dealer. You will find information on establishing the connection with the UMTS / LTE network in the documentation for the hardware used.

  • Page 50: Ethernet And Lan

    ► Connect the network cable to your network connection (2). Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Fujitsu...

  • Page 51: Your Port Replicator (Optional)

    7 = DVI-D port 2 = ON/OFF switch 8 = DisplayPort 3 = Security Lock device 9 = LAN port 4 = Unlocking lever 10 = USB ports 5 = DC input connector (DC IN) Fujitsu...

  • Page 52: Connecting The Notebook To The Port Replicator

    PortReplicator ► Switch the notebook off. ► Remove the mains plug for the mains adapter from the mains socket. ► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook. Fujitsu...
  • Page 53 ► Lay it on the Port Replicator (1). Position the notebook so that it is in line with the back edge of the Port Replicator. ► Press on the notebook at the position denoted (2) to make sure that it engages into the Port Replicator. Fujitsu...

  • Page 54: Connecting The Mains Adapter To The Port Replicator

    If the notebook cannot be shut down properly, press the ON/OFF button on the Port Replicator for approx. four seconds. The notebook will switch off. Any unsaved data may however be lost. Fujitsu...

  • Page 55: Disconnecting The Notebook From The Port Replicator

    We recommend that the notebook is switched off or that the appropriate undocking function provided by the operating system is executed. ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2). Fujitsu...

  • Page 56: Security Functions

    ► To be able to use the palm vein sensor (1), you must install the software. The current Workplace Protect software for palm vein and fingerprint sensors can be found on the Internet at "http://www.fujitsu.com/fts/solutions/business-technology/security/secure/index.html". Fujitsu...

  • Page 57: Configuring The Fingerprint Sensor

    ► You must install the fingerprint software in order to be able to use the fingerprint sensor (1). The current Workplace Protect software for palm vein and fingerprint sensors can be found on the Internet at "http://www.fujitsu.com/fts/solutions/business-technology/security/secure/index.html". Fujitsu...

  • Page 58: Using The Security Lock

    Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook.

  • Page 59: Protecting Bios Setup Utility (Supervisor And User Password)

    You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password. Password Supervisorpassword User password ► Call the BIOS Setup Utility and go to the Security menu. ► When changing the password, proceed exactly as for password assignment. Fujitsu...

  • Page 60: Password Protection For Booting Of The Operating System

    Password protection for the hard disk Passwordprotection: The hard disk password prevents unauthorised access to the hard disk drives and is checked internally each time the system is booted. The requirement is that you have set at least the supervisor HDD password. Fujitsu...

  • Page 61: Activating Hard Disk Protection

    ► To cancel the password for the second hard disk (Drive1), go to the Drive1 area and select the field Set Master Password, then proceed in exactly the same way as for cancelling the password for the first hard disk (Drive0). Fujitsu...

  • Page 62: Boot From Removable Media

    Setup Notice: Changes have been saved is displayed to confirm that the text has been saved. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The notebook will restart and the Owner Information will be adopted. Fujitsu...

  • Page 63: Trusted Platform Module (Tpm) (Device-Dependent)

    ► Mark the TPM Security Chip Setting field and press the Enter key. ► Select Disabled to deactivate the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. Your notebook will now restart and TPM will be disabled. Fujitsu...

  • Page 64: Smartcard Reader

    SmartCard with you. In order to be able to take advantage of all the security features of your notebook, you will need a CardOS SmartCard from Fujitsu. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard.

  • Page 65: Connecting External Devices

    For more information about whether or not devices need to be switched off, please refer to the documentation supplied with the external device. Some of the external devices require special drivers (see the operating system and external device documentation). Fujitsu...

  • Page 66: Connecting An External Monitor

    You can also use a key combination to switch back and forth between the external monitor and the notebook’s LCD screen, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD screen simultaneously. Fujitsu...

  • Page 67: Connecting An External Monitor To The Port Replicator

    ► First switch on the external monitor and then the notebook. You can also switch between the external monitor and the LCD monitor of the notebook, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. Fujitsu...

  • Page 68: Hdmi Port

    Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu...

  • Page 69: Usb Port With Charging Function (Anytime Usb Charge)

    ► Left click on the icon to safely remove hardware, located in the taskbar. ► Select the device which you want to shut down and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu...

  • Page 70: Connecting External Audio Devices

    If you purchase a cable from a retailer, please note the following information: The headphones/microphone/Line-In/Line-Out/headset-combi port on your notebook is a "3.5 mm jack". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Fujitsu...

  • Page 71: Removing And Installing Components During Servicing

    The equipment and tools you use must be free of static charges. • Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. Fujitsu...

  • Page 72: Preparing To Remove Components

    Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page Fujitsu...

  • Page 73: Removing The Cover

    ► Lift the cover off the notebook (2). Removing memory modules ► Carefully push the two mounting clips outwards (1). Memory expansion Memory module The memory module snaps upwards (2). ► Pull the memory module out of its slot in the direction of the arrow (3). Fujitsu...

  • Page 74: Installing A Memory Module

    ► Install the battery again (see "Installing a battery", Page 36). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that you disconnected before. Fujitsu...

  • Page 75: Settings In Bios Setup Utility

    ► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...

  • Page 76: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...

  • Page 77: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"...

  • Page 78: Restoring The Hard Disk Contents Under Windows

    When certain characters are entered on the keyboard, only numerals are written Abeepsounds everysecond Cause Troubleshooting The virtual numeric keypad of your device is ► Press the key. activated, see "Virtual numeric keypad", Page 26 Fujitsu...

  • Page 79: The Notebook's Lcd Screen Remains Blank

    ► Check whether the data cable is properly connected to the notebook and the external monitor (if it is plugged in with a connector). ► Switch on the external monitor and the notebook. Fujitsu...

  • Page 80: The External Monitor Is Blank Or The Image Is Unstable

    ► Charge the battery. ► Insert a charged battery. ► Connect the mains adapter to the notebook. The power adapter is not connected correctly. ► Check whether the mains adapter is connected correctly to the notebook. ► Switch the notebook on. Fujitsu...

  • Page 81: The Notebook Stops Working

    The wireless component is enabled. Despite ► Check whether the radio connection is this, the wireless connection to a network does switched on via the software. not work. ► Further information on using the radio component can be found in the help files. Fujitsu...

  • Page 82: Smartcard Reader Is Not Recognised

    ► If you are working in a network, contact your system administrator, who can boot up your notebook with a Supervisor SmartCard. Acoustic warnings Acoustic error messages Errors Cause Troubleshooting A beep sounds every few seconds. ► Charge the battery. The battery is almost flat. Fujitsu...

  • Page 83: Error Messages On The Screen

    Press <F1> to resume, <F2> to SETUP ► Press the function key to start the operating system. This error message appears if an error occurs ► Press the function key to access the during the self-test before starting the operating BIOS Setup. system. Fujitsu...
  • Page 84 ► Contact your sales outlet or our customer service centre. System cache error - Cache disabled ► Contact your sales outlet or our customer service centre. System timer error ► Contact your sales outlet or our customer service centre. Fujitsu...

  • Page 85: Technical Data

    4-GByte or 8-GByte module The data sheet for the device provides further technical data. You can find the data sheet on your device or you can download it from the Internet at "http://www.fujitsu.com/fts/support/". Port replicator (optional) Electrical data Safety regulations complied with...

  • Page 86: Rechargeable Battery

    Technical Data Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://www.fujitsu.com/fts/support/". Rated voltage 10.8 V Rated capacity 77 Wh or 51 Wh (depending on the battery option) Mains adapter Technicalspecifications Electrical data...

  • Page 87: Manufacturer's Notes

    Declarationofconformity The "Declarations of Conformity" for the device can be found on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. CE marking...

  • Page 88: Other Certification Markings

    Federal Communications Commission (FCC) of the USA. Although it is not explicitly forbidden to travel in the US trading area carrying this device, to avoid trouble at customs clearance, Fujitsu Technology Solutions GmbH recommends not to bring this device into the US trading area.

  • Page 89: Doc (Industry Canada) Notices

    Notice to Users of Radios and Television This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment Regulations. CET appareil numérique de la class B respecte toutes les exigence du Réglement sur le matérial brouilleur du Canada. Fujitsu...
  • Page 90 Les réparations de l’équipement de télécommunications doivent être effectuées par un service de maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.

  • Page 91: Fcc Regulatory Information For Notebooks With Radio Device

    If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Fujitsu...
  • Page 92 Export restrictions This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce Fujitsu...
  • Page 93 (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorised by Fujitsu Technology Solutions may invalidate the user’s right to operate this equipment. Fujitsu...
  • Page 94 Fn + F7 27 Components Fn + F8 27 installing / removing 67 Fn + F9 28 Configuration, BIOS Setup Utility 71 Fn key 25 Connecting audio devices 66 Fn+F2 27 Connecting headphones 66 Fn+F5 27 Crystal View display Fujitsu...
  • Page 95 16 cancel system protection 56 Manual removal of data carrier 40 protecting with password 56 Mechanical backup 54 Operating system, restoring 74 Memory card Optical drive 38 handling 42 inserting 42 removing 42 Memory expansion Packaging 15 Fujitsu...
  • Page 96 Security functions, TPM 59 SmartCard 60 Transport Security Lock 54 Transport damage 15 Selecting a location 16 Transportation 13–14 Self-discharge, battery 34 Travel, notebook 13 Servicing 67 Troubleshooting 73 Setup Trusted Platform Module 59 see BIOS Setup Utility 71 Fujitsu...
  • Page 97 Removing 37 forgotten 78 Windows key 25 Using the Kensington Lock Cable 54 Wireless LAN Switching the module off 44 Switching the module on 44 VGA connection socket 62–63 Wireless LAN: Virtual numeric keypad 26 safety notes 12 Volume Fujitsu...

Table of Contents