Advertisement
6
OPERATING INSTRUCTIONS
Heat Dry
The HEAT DRY option in combination
with rinse aid will enhance drying
performance. HEAT DRY option is
available on all cycles.
Air Dry
The AIR DRY option will reduce
temperature in the hot rinse of the
selected wash cycle. This option will
slightly decrease energy usage but will
increase the likelihood that dishware will
not be dry.
Child Lock Controls
To prevent children from accidentally
changing the dishwasher cycle or starting
the dishwasher, lock the dishwasher
controls by pressing the DELAY START
pad until the status window displays
"loc". To unlock the controls, press the
DELAY START pad until "loc" is no longer
displayed in the status window.
To Cancel a Cycle and Delay Start
Both running cycle and delay countdown
can be canceled at any time.
Open the dishwasher door and press
the START/CANCEL pad until you hear
a tone. The running cycle or delay
countdown is canceled.
If desired, a new cycle can now be
selected, by pressing START/CANCEL
pad and closing the door immediately,
the new cycle will begin.
To Cancel a Setting
If you have selected your cycle and
options and decide to cancel, by pressing
the START/CANCEL pad, the unit will go
into a stand-by mode, which all LEDs will
go out.
Delay Start
The DELAY START option allows you
to automatically delay starting your
dishwasher from 1-24 hours.
Select your desired cycle and options,
then press the DELAY START pad until
the desired delay time displays in the
status window. The LEDs of selected
cycle and options are illuminated. The
status window displays the delay time
and then displays 'Press Start'.
To start the delay countdown, press START/
CANCEL pad and close door immediately.
The status window displays 'Close' after
the START/CANCEL pad is pressed.
A tone will sound indicating that the
countdown has started after the door is
closed. The selected cycle starts when the
countdown is completed.
Opening the door during cycle
If door is opened while a cycle is running
or delay is counting down, the dishwasher
will stop running.
The LEDs of selected cycle and options
are illuminated, the status window
displays the remaining cycle time or delay
time and displays 'Press Start'.
To resume, press START/CANCEL pad and
close the dishwasher door immediately.
The status window displays 'Close' after
the START/CANCEL pad is pressed.
A tone will sound indicating that the
dishwasher will begin running from the point
of interruption after the door is closed.
If the dishwasher door is kept open for
too long, or the door is closed without
pressing START/CANCEL pad, the running
cycle or delay countdown will be canceled.
Status Indicator Lights
The CLEAN light will remain on after door
is opened.
When the SANITIZE option is selected
and the criteria is met, the Sanitized
indicator will display and remain on after
the door is opened. If the sanitization
criteria is not achieved, the indicator
will not display. This can happen if the
cycle is interrupted or if the sanitization
temperature could not be reached due to
incoming water temperature significantly
below 120°F.
Advertisement
