Transportation And Storage - Husqvarna HTC 280 Operator's Manual

To set the product in transport
position
Put some type of protection on the product during
transportation. The protection keeps natural elements
such as rain and snow away from the product.
The product can be divided into 2 components. This
makes the transportation easier.
Always move the product with the lifting eye and the
handlebar.
1. Disconnect the motor cable from the electric
enclosure (A).
2. Loosen the lock bolts some turns to release the
pressure (B).
3. Pull out the lock pins (C) and remove the lock bolts
(D) on each side of the grinding head.
B
D
4. Remove the wheel chassis from the grinding head.
16

Transportation and storage

A
C
5. Put the product in tilted transport position (A).
Loosen the lock knobs (B) on the support foot.
A
B
6. Fold the support foot (C).
7. Hold down the handle on the angle joint. At the same
time push the top part of the frame carefully forward.
C
917 - 002 - 13.12.2018