Layout And Items Supplied; Intended Use; Technical Data - EINHELL 4513888 Original Operating Instructions

Safety information for hammers
a) Wear ear protection. The impact of noise
can cause damage to hearing.
b) Use the additional handles supplied with
the tool. Losing control of the tool can cause
injuries.
c) Hold the equipment by the insulated
handles when carrying out work during
which the plug-in tool could strike
concealed power cables. Contact with a
live cable might also make the metal parts
of the equipment live and cause an electric
shock.
Keep this safety information in a safe place.

2. Layout and items supplied

2.1 Layout (Fig. 1)
1. Locking sleeve
2. Drill/impact drill selector switch
3. Changeover switch
4. On/Off switch
5. Tool chuck
6. Button
7. Battery capacity indicator
8. Button for battery charge level indicator
9. LED lamp
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
Anl_TE_HD_18_Li_SPK7_USA.indb 12 Anl_TE_HD_18_Li_SPK7_USA.indb 12
EN
•
Cordless impact drill
•
Original operating instructions
•
Safety information
Separately available accessories
18V 1.5Ah P-X-C lithium-ion battery
18V 2.0Ah P-X-C lithium-ion battery
18V 2.6Ah P-X-C Plus lithium-ion battery
18V 3.0Ah P-X-C lithium-ion battery
18V 4.0Ah P-X-C lithium-ion battery
18V 5.2Ah P-X-C Plus lithium-ion battery
18V P-X-C charger
Explore battery + charger options at
einhellUSA.com

3. Intended use

The equipment is designed for drilling work with
impact action in concrete, rock and brick, always
using the correct drill bit. The equipment is also
suitable for screwdriving and drilling in wood and
steel.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.

4. Technical data

Motor power supply: ............................18 V
No load speed: ....................... 0-1100 min
Clockwise/counter-clockwise: ........................Yes
Blow rate: .............................. 0-5700 min
Blow strength: ..............................................1.2 J
Drilling capacity
concrete/stone (max.): .................0.5 in. (12 mm)
Weight: ......................................... 3.7 lbs (1.7 kg)
The maximum screw diameter indicates the
maximum diameter of the screw that can be
screwed into wood. The screw diameter can vary
depending on the type of wood.
- 12 -
(rpm)
-1
(rpm)
-1
23.04.2019 11:14:25 23.04.2019 11:14:25