The Program Is Canceled And A Fault Indicator Light Lights Up On The Control Field - Miele WWD 660 WCS Operating And Installation Instructions

Frequently Asked Questions
The program is canceled and a fault indicator light lights up on
the control field
Problem
The fault indicator light
 lights up,  and  ap-
pear alternately on the
time display, and the
buzzer sounds.
The fault indicator light
 lights up,  and  ap-
pear alternately on the
time display, and the
buzzer sounds.
The fault indicator light
 lights up,  and 
appear alternately on
the time display, and
the buzzer sounds.
 and  alternate on
the time display and the
buzzer sounds.
52
Possible cause and solution
The drain is blocked or restricted.
The drain hose has been fixed too high.
 Clean the filter and the pump.
 The maximum drain height is 39 ⅜" (1 m).
The water intake is blocked or restricted.
 Check whether the water supply is turned on prop-
erly.
 Check whether the intake hose is kinked.
 Check whether there is sufficient water pressure.
The filter in the water intake is blocked.
 Clean the filter.
The water protection system has reacted.
 Close the water supply.
 Contact Service.
There is a fault.
 Disconnect the washing machine from the power
supply. Unplug the appliance or switch off the
breaker.
 Wait at least 2 minutes before reconnecting the
washing machine to the power supply.
 Then switch the washing machine on again.
 Restart the program.
If the fault message appears again, contact Miele
Customer Service.