Remoteupdate - Miele WWD 660 WCS Operating And Installation Instructions

 RemoteUpdate
The RemoteUpdate function updates
the software in your washing machine.
If an update is available for your wash-
ing machine, it will automatically down-
load it. Updates will not be installed au-
tomatically. They must be initiated man-
ually.
If you do not install an update, you can
continue to use your washing machine
in the usual way. However, Miele rec-
ommends installing updates.
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele app.
A  message will appear on the time
display if an update is available.
You can install the update immediately
or postpone this until later. When the
washing machine is switched on again,
you will be reminded about the update.
Deactivate RemoteUpdate if you do not
want to install any updates.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch off the washing ma-
chine during an update. Otherwise,
the update will be aborted and will
not be installed.
Programmable functions
- Some software updates can only be
carried out by Miele Customer Ser-
vice.
Activating/deactivating
The RemoteUpdate function is acti-
vated as standard. Available updates
will be downloaded automatically but
will only be installed if you initiate instal-
lation manually. Deactivate RemoteUp-
date if you do not want any updates to
be downloaded automatically.
Options
 = RemoteUpdate is deactivated
 = RemoteUpdate is activated
(factory default)
Starting the update
After the washing machine is switched
on,  appears on the time display.
 Touch the Start/Add laundry sensor
button.
 starts to flash on the time display.
The update starts.
Bars on the time display show the
progress of the update:
 = 0%
 = 100%
87