Epson DFX-9000 Reference Manual page 102

Note:
The language you select is also used for other settings, modes, and
test print outs, such as default-settings mode and printing a Hex
Dump.
5. If you select Print Settings, press the SetD (Top of Form)
button to print the current settings.
6. Press the ItemU (Font) or ItemD (Pitch) button to select the
menu parameters which you wish to change.
Note:
You can scroll the menu by holding the ItemU (Font) or ItemD
(Pitch) button for a few seconds.
7. Press the SetU (Tear Off) or SetD (Top of Form) button to
select the values within the selected parameter until you find
the desired setting.
Note:
You can scroll the value by holding the SetU (Tear Off) or SetD
(Top of Form) button for a few seconds.
8. After setting the selected parameter to the desired setting, you
may either continue to make changes to other parameters by
pressing the ItemD or ItemU button, or exit the SelecType
mode.
Note:
The menu selection returns to the first menu after the selection of
the last menu parameter is done.
9. When you finish making settings, press the Menu (Tear Off
and Top of Form) buttons.
10. The LCD displays Save Setting. If you want to save the
settings, select Yes by pressing the SetU (Tear Off) button. If
you do not want to save the settings, select No by pressing the
SetD (Top of Form) button.
102
Control Panel