Epson DFX-9000 Reference Manual page 97

Auto CR (IBM PPDS)
This setting is available only in IBM PPDS emulation mode. When
auto carriage return is on, each line feed (LF) code or ESC J code
is accompanied by a carriage return (CR) code so the printer
moves the next printing position to the left margin. When this
setting is off, you must send a CR code after the line feed code to
move the printing position to the left margin.
IBM character table (IBM PPDS)
This setting is available only in IBM PPDS emulation mode. You
can select Table 2 or Table 1 for the IBM character table.
Buzzer
The printer beeps when an error occurs. See "Using the error
indicators" on page 108 for more information on printer errors. If
you do not want the printer to beep when an error occurs, turn
off this setting.
Low-noise mode
When this mode is set to On, the noise is reduced, but the printing
speed is slower.
Auto cut mode
This function is available only when the optional perforation
cutter (#C81570X) is installed in the printer. When this setting is
set to On, the perforation cutter cuts each page at the perforation
automatically. Note the following when you turn on this
functions:
❏ Make sure the paper is at least 4 inches long.
❏ Do not change the top of form position using the Top of Form
button.
❏ Do not feed the paper using the Micro Feed buttons.
Control Panel
4
4
4
4
4
4
4
4
4
4
4
4
97