Table of Contents
Advertisement
1020 2242 M.2 solid-state drive
For access, remove this FRU:
• "1010 Base cover assembly" on page 59
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the system is operating or in sleep mode.
Removal steps of the 2242 M.2 solid-state drive
Step
Screw (quantity)
2
M2 × L2 mm, flat-head, nylon-coated (1)
Installation steps of the 2242 M.2 solid-state drive
Note: Install the M.2 solid-state drive cover in the orientation as shown.
Color
Torque
0.181 Nm
Silver
(1.85 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
61
Advertisement
Table of Contents
