Seagate Pipeline HD ST2000VM0002 Product Manual page 9

Table of Contents

Advertisement

www.seagate.com
Table 1 Drive specifications summary for 2TB,1.5TB, and 1TB models (Continued)
Drive Specification
Voltage tolerance
(including noise)
Ambient temperature
Temperature gradient (max)
Relative humidity
Relative humidity gradient (max)
Wet bulb temperature (max)
Altitude, operating
Altitude, nonoperating
(below mean sea level, max)
Operational Shock (max)
Non-Operational Shock (max)
Vibration, operating
Vibration, nonoperating
Drive acoustics, sound power
Idle**
Seek
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Warranty
Load/Unload cycles
Supports Hotplug operation per the
Serial ATA Revision 3.0 specification
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power
to operational levels
Pipeline HD Product Manual, Rev. A
ST2000VM0002
30°C per hour (nonoperating)
2Hz–22Hz: 0.25 Gs, Limited displacement
To determine the warranty for a specific drive, use a web browser to access the
following web page:
http://www.seagate.com/support/warranty-and-replacements/
From this page, click on the "Verify Your Warranty" link. You will be asked to provide
the drive serial number, model number (or part number) and country of purchase.
The system will display the warranty information for your drive Preventative
maintenance: none required.
300K at 25°C, 50% rel. humidity
ST1500VM0002
5V: ± 5%
12V: ±10%
0° to 75°C (operating)
–40° to 70°C (nonoperating)
20°C per hour (operating)
5% to 95% (operating)
5% to 95% (nonoperating)
30% per hour
37.7°C (operating)
40.0°C (nonoperating)
–60.96m to 3048m
(–200 ft. to 10,000+ ft.)
–60.96m to 12,192m
(–200 ft. to 40,000+ ft.)
80 Gs at 2ms
300 Gs at 2ms
22Hz–350Hz: 0.50 Gs
350Hz–500Hz: 0.25 Gs
5Hz–22Hz: 3.0 Gs
22Hz–350Hz: 3.0 Gs
350Hz–500Hz: 3.0 Gs
2.0 bels (typical)
2.2 bels (max)
2.2 bels (typical)
2.4 bels (max)
14
1 per 10
bits read
0.55%
Yes
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pipeline hd st1500vm0002

Table of Contents