Cruise Control; Kick To Start; Riding Your Ace E Scooter; Operating Your Device - Hover-1 Pro Series ACE R450 Owner's Manual

CRUISE CONTROL

Cruise control comes preset as active with the Hover-1 Ace. To engage cruise
control, you just need to press the throttle down for 6 seconds, and cruise control
will automatically activate. You will hear 2 beeps, and the cruise control indicator
will flash on the display to indicate that it is activated. Press the throttle down
once or squeeze the brake handle to cancel cruise control. You can quickly press
the power button 4 times to disable or re-enable the cruise control function.

KICK TO START

For safety reasons, the E-Scooter will not accelerate unless it is already moving at
least 1.8 mph (3 km/h). You must first kick off the ground and then press the
throttle in order to ride the E-Scooter.

RIDING YOUR Ace E SCOOTER

FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS
CAN LEAD TO DAMAGE TO YOUR DEVICE, VOID YOUR MANUFACTURER
WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS BODILY
INJURY, AND CAN LEAD TO DEATH.

OPERATING YOUR DEVICE

Make sure the device is fully charged before the first use. Before turning on your
Ace E-Scooter, ride it like a normal kick scooter to get comfortable with the device
before using it with the motor.
When you are comfortable riding the E-Scooter, power it on. For the motor to
activate, you must first start riding the E-Scooter manually and then push the
throttle down with your thumb.
To slow down, disengage the throttle and squeeze the brake handle to engage the
disk brake. The brake is pressure-sensitive, so a tighter squeeze will provide more
stopping power.
Use the handlebars to turn in the desired direction.
The Ace E-Scooter can be operated manually if you do not wish
to use the motor.
Quickly press the power button two times to turn the headlight on/off. Quickly
press the power button three times to switch units between KM/H and MPH.
27
Quickly press the power button six times to switch between the odometer and the
trip mileage.
At higher speeds, you may need to shift your weight to maintain your balance while
making turns.
Prepare to brace yourself if you encounter bumps or uneven surfaces, then
dismount and carry your Ace to a safe operating surface.
WARNING
Do not turn sharply or at high speeds. Do not turn or ride quickly along slopes,
as it may cause injury. Proper use of your brake is vital to ensure safe, efficient
stopping. To avoid misuse and potential injury, do not apply sudden or
excessive force to your brake. Apply the brake gradually and give yourself
enough room to come to a complete stop safely.
SPEED & WEIGHT LIMITATIONS
Speed and weight limits are set for your own safety. Please do not exceed the limits
listed in the "SPECIFICATIONS" section of this manual (Page 37).
WARNING
Riding the Ace while exceeding the weight limit may increase the possibility of
injury or product damage.

OPERATING RANGE

• The Ace can travel up to 25 miles on a fully charged battery under ideal riding
conditions. The following are some of the major factors that will affect the
operating range of your device:
• Terrain: Operating Range is highest when riding on a smooth, flat surface. Riding
uphill and/or on rough terrain will reduce operating range significantly.
28