Maintenance Instructions; If You Need Assistance - Maytag MDG17CSBGW Installation Instructions Manual

Clean lint screen before and after each cycle.
■
Removing accumulated lint:
■
From inside the dryer cabinet:
Lint should be removed every 2 years or more often,
depending on dryer usage. Cleaning should be done
by a qualified person.
From the exhaust vent:
Lint should be removed every 2 years, or more often,
depending on dryer usage.
Keep area around dryer clear and free from combustible
■
materials, petrol, and other flammable vapors and liquids.
Keep dryer area clear and free from items that would
■
obstruct the flow of combustion and ventilation air.
Contact your authorized Maytag® Commercial Laundry
distributor or visit: www.MaytagCommercialLaundry.com.
When you call, you will need the dryer model number and
serial number. Both numbers can be found on the serial-rating
plate located on your dryer.

MAINTENANCE INSTRUCTIONS

If dryer does not operate, check the following:
Electrical supply is connected.
■
Circuit breaker is not tripped or house fuse is not blown.
■
Door is closed. Listen closely to hear the door switch
■
activate.
Controls are set in a running or "ON" position.
■
START button has been pushed firmly.
■
Check that gas supply shut-off valves are set in open
■
position.

IF YOU NEED ASSISTANCE

EU - DECLARATION OF CONFORMITY
CE - DECLARATION DE CONFORMITE
BAUKNECHT HAUSGERÄTE GmbH, D-73614 Schorndorf
WE (nous):
WHIRLPOOL EUROPE S.r.l I-21025 COMERIO
representing (représentant):
declare under our sole responsibility that the product
déclarons sous notre propre responsabilité que le produit
Maytag
dryer
(sèche-linge) :
Maytag
to which this declaration relates is in conformity with the following standard(s) or other
normative document(s)
auquel se référe cette déclaration est conforme aux normes suivantes ou autres documents normatifs
EN 60335-1:2002+A1+A2+A11+A12+A13
EN 60335-2-11:2003+A1+A2
EN 12752-1:1999
EN 50366:2003+A1:2006
EN ISO 10472-1:2008
EN ISO 10472-4:2008
EN 55014-1:2006
EN 61000-3-2:2006
EN 61000-3-11:2000
following the provisions of Directive(s):
suivant les prévisions des Directives :
2009/142/EC EUROPEAN GAS APPLIANCE DIRECTIVE
2006/95/EC LOW VOLTAGE DIRECTIVE
2004/108/EC ELECTROMAGNETIC COMPATIBILITY DIRECTIVE
Electro-magnétique)
2006/42/EC MACHINERY DIRECTIVE
Schorndorf, 29.04.2010
Place and date:
lieu et date :
MDG17CS
MDG17MN
(CEE Directive Basse Tension)
(CEE Directive Compatibilité
represented by
Roberto Mottura
Director PDC, FC
Name and signature of authorised person
Nom et signature de la personne autorisée
19