Graco PE14 Instructions Manual page 17

Dispensing Fluid and Operation Mode Screens
FIRE HAZARD: Conductive metal surfaces on the
meter must not make contact with any positively
charged metal surface, including (but not limited to),
the starter solenoid terminal, alternator terminal or
battery terminal. Such contact could cause electrical
arcing and a fire.
If you are in the Setup Mode, to display the Operation Mode Screens use the UP or DOWN ARROW button to select
HOME from the list. Press the Center ENTER button to display the Operation Mode Home Screen shown in F
A complete description of the Setup Mode Screens begins on page 10.
Home Screen (F
ME14 and PE14 Meters
ME14 Meters
MOBIL1 5W-20
D
MANUAL
TOTALS
C
F . 18
IG
ME14 and PE14 Include A - D
A. Screen Identifier Icon: House displays when user is
on the Home Screen.
B. Operation Screens: List/menu of screen choices
available to user. Operation Screen choices include:
ME14 Meters
• MANUAL
• TOTALS
PE14 Meters
• MANUAL
• PRESET
• TOTALS
312865A
. 18)
IG
B
ti12175a
Dispensing Fluid and Operation Mode Screens
PE14 Meters
MOBIL1 5W-20
D
A
B
C
1. Use UP or DOWN ARROWS to scroll through
options.
2. Press center, ENTER button to confirm selection
and display the screen.
C. Battery Indicator: Appears only on Home Screen.
Shows current battery charge strength. Appears and
flashes on all screens when battery's charge is low.
D. Information Banner: Configurable information
banner. Data is input on Setup Mode Banner Screen,
page 16.
MANUAL
PRESET
TOTALS
. 18.
IG
A
ti12184a
17