Graco PE14 Instructions Manual page 15

Preset Screen (F
For PE14 Meters Only
Sets the default preset amounts. Typically, you would
enter amounts you most frequently dispense.
PRESET
1
4.0
F . 15
IG
PE14 Meters includes D, P and Q
D. Wrench Icon: Returns user to Main Screen.
P. Measurement Unit: Set on Units/Limit Screen,
page 12.
Q. Set Preset Amounts: Sets dispensing options for
the Preset Dispense mode.
Sets up to 3, default preset quantities. The amounts can
be listed in any order and do not have to be in a numeric
order.
312865A
. 15)
IG
2 3
6.0
10
P QTS
Q
D
ti12188a
To set Preset amounts (F
1. Use the LEFT or RIGHT ARROWS to select one of
the three amount fields (Q).
2. Use the UP or DOWN ARROWS to increase or
decrease the number appearing in the field until the
desired amount displays.
Pressing and holding the ARROW button down,
increases the scrolling speed.
3. Press center, ENTER button to confirm amount.
The amounts displayed do not automatically recal-
culate quantities when changing between measure-
ment units. For example, if you change from quarts
to liters you must manually change the preset
amounts.
4. When you have finished making changes, use the
LEFT OR RIGHT ARROW button to move curser
over Wrench icon.
5. Press center, ENTER button, to return to Main
Setup Screen.
Setup Mode Screens
. 15):
IG
15